Skip to main content

2005 Jeep Grand Cherokee Key Fob Remote Programming Instructions

Here are the programming instructions for a 2005 Jeep Grand Cherokee Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog. If you like what we provide please forward on to your friends & family and share via the social media icons below; people like you are our best advertising tool!

ORDER THIS KEY FOB PART NUMBER HERE:  56038768AD

2005 Jeep Grand Cherokee Key Fob Remote


FOR REMOTE PART (LOCK, UNLOCK, PANIC, TRUNK)

PLEASE NOTE: YOU MUST HAVE ONE WORKING REMOTE TO ADD ONE MORE TO THE SYSTEM.  IF YOU DO NOT HAVE ONE WORKING REMOTE RIGHT NOW THEN THESE INSTRUCTIONS WILL NOT WORK.  YOU WILL HAVE TO GET IT PROGRAMMED BY A LOCKSMITH, MECHANIC, OR DEALER. 

1.  Press LOCK button 5 times at 2 second intervals to resynchronize remote.

2.  Insert key into the ignition switch. Turn ignition to the RUN position
    (as far as you can go without cranking engine). Wait for ignition chimes
    to stop.

3.  Using the working remote, press and hold the UNLOCK button on the remote
    for 4 to 10 seconds.

4. Within the specified 4 to 10 seconds, continue pressing the UNLOCK button
   and then press the PANIC button ( on the programmed remote ) for 1 second
   and release both buttons. A chime will sound to indicate that the remote
   programming mode has been entered ( allow 3 seconds for chime to sound ).

5. Within 30 seconds of the chime, press and release the LOCK and UNLOCK
   buttons simultaneously then press and release just the UNLOCK button
   on the same remote. A chime will sound indicating the remote has been
   programmed. Press and release the LOCK and UNLOCK buttons simultaneously
   and then press the UNLOCK button on each new remote you wish to program
   at this time. A chime will sound after each additional remote is programmed.

6. Turn the ignition OFF and remove key.

7. Test Remotes.


FOR KEY TRANSPONDER/IMMOBILIZER CHIP (METAL KEY)

PLEASE NOTE: THIS PROCEDURE CAN ONLY BE USED ON VEHICLES BUILT IN USA.  YOU MUST HAVE TWO WORKING PROGRAMMED REMOTE/KEYS BEFORE YOU CAN ADD A THIRD REMOTE/KEY. IF YOU ONLY HAVE ONE WORKING REMOTE/KEY AND WANT TO ADD A SECOND KEY THIS PROCEDURE WILL NOT WORK AND YOU WILL HAVE TO GET IT PROGRAMMED BY A LOCKSMITH, MECHANIC, OR DEALER. 


1.  Using first programmed remote/key turn ignition to the ON position
    for 5 seconds. (Do not crank engine). Turn remote/key off and remove.

2.  Within 5 seconds insert second working programmed remote/key.
    Turn ignition to the ON position (Do not crank engine) security light
    will begin to flash and chime will be heard within 10 seconds. Turn
    remote/key off and remove. NOTE: Some vehicles will not chime,
    only the security light will flash.

3.  Within 5 seconds insert third NEW CUT remote/key and turn ignition to
    the ON  position (Do not crank engine). The security light should start
    flashing and within 10 seconds you should hear a chime and the
    security light should go out. Once the security light goes out, the new
    remote/key should be programmed. Turn remote/key to the OFF
    position, remove key.

4.  Test key and remote.


Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.

ENTER YOUR CITY NAME OR ZIP CODE TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU



Was This Information Useful?  Please take a moment to Like / Follow us and share via social media below. It is people like you that help spread the word about us.  It helps so much!  Thanks for visiting and sharing with your friends and family!


Subscribe To Our Social Networks For Special Discounts, Offers, & Contests!

        
By Keyless Entry Remote Inc

Popular posts from this blog

General Mercedes Benz Key Fob Remote Programming Instructions

Here are general programming instructions for Mercedes Benz Key Fob Remotes. Try these instructions on your Mercedes Benz, if they don't work, try to look for your specific year, make. & model.  If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog and if you like what we provide please forward on to your friends & family; people like you are our best advertising tool!

PLEASE NOTE THAT MOST MERCEDES BENZ KEYLESS ENTRY REMOTE KEY FOBS REQUIRE SPECIAL DEALER EQUIPMENT TO PROGRAM.  YOU WILL MOST LIKELY HAVE TO GO TO THE DEALER TO HAVE THEM PROGRAM THE REMOTE TO YOUR VEHCILE.  ALSO, PLEASE CHECK WITH YOUR DEALER TO SEE IF THEY WILL EVEN PROGRAM A REMOTE YOU PURCHASE OFF THE INTERNET, A LOT OF MERCEDES DEALERS ARE JUST REFUSING TO PROGRAM KEY FOBS UNLESS YOU PURCHASE FROM THEM.

ORDER THIS KEY FOB PART NUMBER HERE: 1407601406





1  Place your key in …

Did Your Car Remote Stop Working?

Did your car remote stop working?  It can be a pain in the "you know what" when your vehicle key fob remote stops working.  I mean, come on, it is so hard to just put your key in the door and unlick it manually, lol!  But seriously, we have come to rely on our key fobs and that is why when they stop working it can be very frustrating.  Here are a couple tips to try and get your key fob working again:

1)  Replace the battery.Most vehicle key fob remotes just split open.  Usually there is a small slot on the side of the remote where you can stick a small flat head screw driver in and pop the case open.  There you will find a  small coin battery.  The coin batteries have numbers on them, usually something like CR2032.  That is the battery size.  You can find new coin batteries pretty much anywhere these days, and if you are having a hard time finding them at a local store you can order them online at keylessentryremotefob.com. 

2)  Reprogram the remote.  Sometimes when the bat…