Tuesday, March 19, 2013

Jeep Liberty Key Fob Remote Programming Instructions

Here are the programming instructions for a Jeep Liberty Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog and if you like what we provide please forward on to your friends & family; people like you are our best advertising tool!

NOTE THAT THIS WILL ERASE YOUR CURRENT REMOTE, SO YOU WILL HAVE TO MAKE SURE YOU REPROGRAM YOUR OLD REMOTE.



7 comments:

  1. Great video. Your key fob looks different from mine. I have a 2005 Liberty. Is it the same programming sequence?

    ReplyDelete
  2. Yes this should work with your Liberty, although I have seen some models require dealership programming. Hopefully this one works for you.

    ReplyDelete
    Replies
    1. What do I do if I don't have one working remote? They are both not programmed?

      Delete
    2. Any ideas on what I could do if I don't have a working remote to connect to? In have two fobs, both bit working.

      Delete
    3. unfortunately if you do not have working remotes you have to have a professional program the remote for you.

      Delete
  3. What do I do if I don't have one working remote

    ReplyDelete
  4. unfortunately if you do not have working remotes you have to have a professional program the remote for you. Try a Jeep mechanic or a locksmith, you can find a locksmith in your area by using our preferred locksmith locator here:

    http://blog.keylessentryremotefob.com/p/there-is-no-onboard-programming.html

    ReplyDelete