Friday, May 17, 2013

2000 Volkswagen Passat Key Fob Remote Programming Instructions

Here are the programming instructions for a 2000 Volkswagen Passat Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog and if you like what we provide please forward on to your friends & family; people like you are our best advertising tool!


AT TIME OF PROGRAMMING:

 ALL remotes to be programmed and/or reprogrammed MUST BE PRESENT.

PROGRAMMING:

1. Insert master key into ignition switch.

2. Switch ignition to on.

3. Within 30 seconds.

4. Insert additional key into driver's door lock.

5. Lock vehicle manually.

6. Push key lock or  unlock button.

7. Wait at least 2 seconds.

8. Push key Lock or Unlock button again.

9. Switch ignition to OFF.

Keys can also be programmed using diagnostic equipment.

Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.

ENTER YOUR CITY NAME OR ZIP CODE TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU

Was This Information Useful?  Please take a moment to help support this blog with a donation of any amount!  Your donations help keep this site up to date.  If you are unable to donate, please share via social media below, your help in getting the word out about us helps just as much!  Thanks for visiting, donating, and sharing with your friends and family!

3 comments:

  1. Okay, I am a proud woman right now! I have no training in cars, electronics, etc and I have been searching all day for a different method as this one of turning the ignition on and using having a key in the drivers door did nothing, I tried something new, something I never found on the internet and it WORKED like a charm! Here it is:

    Open the trunk with the key 'A', leave the key in and the trunk open.

    Lock drivers door from the outside with key 'B'
    Push unlock button on key 'B'.
    That's it! Now key 'B' is programmed.

    Do the same exact thing with the other key.

    SO EASY!! I really hope this helps someone else in the near future!

    ReplyDelete
  2. I'm a little confused. Are the VW keys "smart"? Do they have chips and a battery inside them? What is a Transponder key?

    ReplyDelete
  3. The smart key is the remote that does not have a metal key with it, it is just a remote you stick in a slot and that is how you start the car. A transponder key is an actual metal key with a "chip" inside that is a security feature.

    ReplyDelete