Tuesday, May 7, 2013

2001 Mercury Cougar Key Fob Remote Programming Instructions

Here are the programming instructions for a 2001 Mercury Cougar Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog and if you like what we provide please forward on to your friends & family; people like you are our best advertising tool!


1. Turn the ignition from OFF to RUN 4 times within 6 seconds.

2. Turn the ignition OFF. The LED in the clock/trip computer will light up continuously
    to confirm programming mode.

3. Within 20 seconds, press any button on the first keyless remote. The LED in the
    clock will flash 4 times to confirm programming.

4. Within 20 seconds, press any button on second keyless remote.

5. Turn the ignition to RUN. The LED will turn off to indicate end of programming mode.

Was This Information Useful?  Please take a moment to Like / Follow us and share via social media below. It is people like you that help spread the word about us.  It helps so much!  Thanks for visiting and sharing with your friends and family!

Subscribe To Our Social Networks For Special Discounts, Offers, & Contests!

By Keyless Entry Remote Inc

No comments:

Post a Comment