Monday, May 6, 2013

2003 Kia Sedona Key Fob Remote Programming Instructions


Here are the programming instructions for a 2003 Kia Sedona Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog and if you like what we provide please forward on to your friends & family; people like you are our best advertising tool!


ORDER THIS KEY FOB PART NUMBER HERE: PLNBONTEC-T009




This is the layout of jumper pins.

   1 2                        3 4
 5   6    7   8   9  10 11 12
13 14 15 16 17 18  19  20

 ONLY TWO REMOTES CAN BE PROGRAMMED TO THIS VEHICLE.

Obtain all remote transmitters for this vehicle.
1. Locate the data link connector (DLC) under the hood and jump pin 12 to pin 8. This means use a suitable wire or a bent paper clip and make contact with the metal in both terminals.
2. Insert key into ignition and turn ignition switch to the ON position.
3. Press the LOCK button on the remote twice. You should hear the buzzer for about 1 second, this means the remote was accepted to memory.
4. Turn ignition switch to the OFF position. Remove jumper wire from DLC.
5. Programming is now complete. Test remote to ensure proper programming.



Was This Information Useful?  Please take a moment to Like / Follow us and share via social media below. It is people like you that help spread the word about us.  It helps so much!  Thanks for visiting and sharing with your friends and family!


Subscribe To Our Social Networks For Special Discounts, Offers, & Contests!

        
By Keyless Entry Remote Inc

3 comments: