Tuesday, August 13, 2013

2005 Mazda 6 Key Fob Remote Programming Instructions

Here are the programming instructions for a 2005 Mazda 6 Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog and if you like what we provide please forward on to your friends & family; people like you are our best advertising tool!

ORDER THIS REMOTE PART NUMBER HERE:  KPU41846 or KPU41805

1. Close all the doors including the trunk. Get in the driver's seat and OPEN the driver's door.

2. Turn the ignition from ON to OFF (3) times. (ON to OFF = 1 time do it 3)

3. OPEN and CLOSE the DRIVER'S side door (3) times.

4. The vehicle will respond by cycling the door locks to confirm it has successfully entered programming mode.

5. PUSH the LOCK button TWICE on the first remote you are programming (order does not matter). The door locks will cycle to confirm successful programming.

(1 REMOTE) IF you only have one remote PUSH the LOCK button TWICE TWO MORE TIMES. The locks will cycle to confirm successful programming between each time you press twice. Proceed to step 6.

(2 REMOTES) IF you two remotes PUSH the LOCK button TWICE TWO MORE TIMES ON THE SECOND REMOTE YOU ARE PROGRAMMING. The locks will cycle to confirm successful programming between each time you press twice. Proceed to step 6.

(3 REMOTES) IF you have three remotes PUSH the LOCK button TWICE on the SECOND remote then PUSH the LOCK button TWICE on the THIRD remote. The locks will cycle to confirm successful programming between each time you press twice. Proceed to step 6.

6. Programming is complete.

Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.

ENTER YOUR CITY NAME OR ZIP CODE TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU


Was This Information Useful?  Please take a moment to help support this blog with a donation of any amount!  Your donations help keep this site up to date.  Thanks for visiting & Donating!

2 comments:

  1. Brian J. ChristianaAugust 4, 2014 at 6:06 PM

    So I am able to get through the first part and make the key usable. However, I am unable to program the buttons on my new key fob. I purchased the 4-button, switch blade key fob, which said it was compatible with my 2005 Mazda Sedan. Has anyone had similar issues, or know how to fix this? Please email me at buckshot_j2002@yahoo.com if you are able to assist me. Thanks!

    Brian

    ReplyDelete
    Replies
    1. I'm trying to program my new kry fob. I read you have to get an Identical model as what came woth the car.
      My 2005 Mazda 6 came with a plain 4 button model 41805,not a switch blade type, so I'm thinking the one you are trying to program is the wrong model.

      Delete