The Key Fob Experts

The Key Fob Experts

Cool Start (Crimestopper), Ezee Start Alarm Key Fob Remote Programming Instructions

Here are the programming instructions for a Crimestopper Alarm Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog. If you like what we provide please forward on to your friends & family and share via the social media icons below; people like you are our best advertising tool!

ORDER THIS KEY FOB PART NUMBER HERE:  Crimestopper Alarm Key Fob Remotes





All transmitter codes must be learned at time of programming!! The unit will learns up to 4 different transmitter codes.

1. Open Hood (If no hood pin installed with your system, then you must ground the Gray Hood pin wire).

2. Turn key to the ON position. (Pink wire must be connected).

3. Press Programming button 4 times, then after a few seconds the unit flashes the parking lights 4 times.

4. Press button #1 of the transmitter to be coded. You should get 2 light flashes indicating the unit is waiting for a 2nd code, then press button #1 of a second transmitter, the unit will flash 3 times indicating its waiting for the 3rd code and so on. If all 4 codes are learned, the unit will automatically exit code learning mode, otherwise turn key off and close hood.


Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.

ENTER YOUR CITY NAME OR ZIP CODE TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU


Was This Information Useful?  Please take a moment to help support this blog with a donation of any amount!  Your donations help keep this site up to date.  If you are unable to donate, please share via social media below, your help in getting the word out about us helps just as much!  Thanks for visiting, donating, and sharing with your friends and family!

2 comments

  1. I have the volume set as high as it will go and I CANNOT hear this guy !! How do you learn how to do this if you can't hear him??!!

    ReplyDelete
    Replies
    1. There is something wrong with your computer. I have no problem hearing him.

      Delete

Connect With Us