Tuesday, November 19, 2013

2001 Mazda 626 Key Fob Remote Programming Instructions


Here are the programming instructions for a 2001 Mazda 626 Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog. If you like what we provide please forward on to your friends & family and share via the social media icons below; people like you are our best advertising tool!

ORDER THIS KEY FOB PART NUMBER HERE:  GD7D-675DY



Programming Instructions:


1. Close all the doors including the trunk. Get in the driver's seat and OPEN the driver's door.

2. Turn the ignition from ON to OFF (3) times. (ON to OFF = 1 time do it 3)

3. OPEN and CLOSE the DRIVER'S side door (3) times.

4. The vehicle will respond by cycling the door locks to confirm it has successfully entered programming mode.

5. PUSH the LOCK button TWICE on the first remote you are programming (order does not matter). The door locks will cycle to confirm successful programming.

 (1 REMOTE) IF you only have one remote PUSH the LOCK button TWICE TWO MORE TIMES. The  locks will cycle to confirm successful programming between each time you press twice. Proceed to step 6.

 (2 REMOTES) IF you two remotes PUSH the LOCK button TWICE TWO MORE TIMES ON THE  SECOND REMOTE YOU ARE PROGRAMMING. The locks will cycle to confirm successful programming between each time you press twice. Proceed to step 6.

 (3 REMOTES) IF you have three remotes PUSH the LOCK button TWICE on the SECOND remote  then PUSH the LOCK button TWICE on the THIRD remote. The locks will cycle to confirm

 successful programming between each time you press twice. Proceed to step 6.

6. Programming is complete.

Having trouble programming the remote or just want a professional to program the remote for you? Enter your city or zip code in the search box below to find a professional key fob installer in your area.

ENTER YOUR CITY NAME TO FIND A
PROFESSIONAL KEY FOB INSTALLER NEAR YOU


Was This Information Useful?  Please take a moment to Like / Follow us and share via social media below. It is people like you that help spread the word about us.  It helps so much!  Thanks for visiting and sharing with your friends and family!


Subscribe To Our Social Networks For Special Discounts, Offers, & Contests!

        
By Keyless Entry Remote Inc

4 comments:

  1. What happens when the car will not enter programming mode?

    ReplyDelete
    Replies
    1. The timing on these programming instructions can be tricky. A lot of times it takes a few trys to get it down. Are you sure your vehicle came equipped with keyless entry?

      Delete
    2. Positive, I checked the original information sticker that came when the car was first bought. I actually just tried again and the car made the two beeps after I pressed the car button four times instead of three. Unfortunately when I pressed the buttons on the remote nothing happened.

      Delete
    3. so it sounds like you got it into programming mode. did you check the batteries on the remote? hold the remote close to the steering column when you are pressing the buttons on it. sometimes you have to hold them down for a significant amount of time before it registers.

      Delete