The Key Fob Experts shield

The Key Fob Experts shield

Viper Remote Key Fob Programming Instructions

Here are the programming instructions for a Viper Alarm Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you can visit us at Keylessentryremotefob.com You can also leave comments or suggestions at the bottom of this blog. If you like what we provide please forward on to your friends & family and share via the social media icons below; people like you are our best advertising tool!

ORDER THIS KEY FOB PART NUMBER HERE:  Viper Key Fobs





6 comments

  1. Replies
    1. You just need to cycle through the buttons, so program 1 buttton, then 2nd button, then 3rd button, and so on. It should not matter the function of the button on the remote, so remote start should be the same.

      Delete
  2. This comment has been removed by the author.

    ReplyDelete
  3. If you only have a two button remote, you simply turn the key off after programming button #2?

    Also, I have one remote that still works. I have to reprogram both the old and the new one together, I assume?

    ReplyDelete
    Replies
    1. you are correct on both, you will turn off the programming after the (2) buttons and you must reprogram the one that is currently working at the same time.

      Delete

Connect With Us
Keyless Entry Remote Inc, 7902 Davenport St, Omaha, NE 68114
M - F 8:00am-6:00pm CST